uPVC Pipes (Ring Fit Type)
- Corrosion resistant pressure pipe.
- Metric series sizes 20mm to 280mm for use at use at temperatures up to and including 60° C.
- Pressure rating (2.5 Kgf/cm to 12.5 Kgf/cm²
- Generally resistant to most acids, bases, salts, aliphatic solutions, oxidants, and halogens.
- Typical
applications includes: chemical processing, plating, potable water
systems, water and Water treatment, irrigation, agricultural, and
other industrial applications involving corrosive fluid transfer.
Scope
Outlined specification IS, DIN. This pipe is intended for use in applications where the fluid conveyed does not exceed 60 °C.
PVC Materials
The material used in the manufacture of the pipe shall be domestically produced rigid polyvinyl chloride (PVC) compound,
PVC
Resin grade K-6701 of Reliance Ind. Ltd. and 67GER01 of Indian
Petrochemicals Corp. Ltd. are used in manufacture of uPVC Pipes.
Dimensions
PVC
Pressure Pipes shall be manufactured in strict accordance to the
requirements of IS: 4985-2000 for physical dimensions and tolerances.
Each production run of pipe manufactured in compliance to this
standard, shall also meet or exceed the test requirements for
materials, workmanship, reversion, hydrostatic pressure, resistance to
external blows density, sulphated ash content as defined in IS:
4985-2000
All Ring fit (Elastic sealing ring) belled-end
pipe shall have tapered sockets to create an interference-type fit,
which meet or exceed the dimensional requirements and the minimum
socket length for pressure-type sockets as defined in IS: 4985-2000.
Dimensions
of GANGA / HIPPO Elastic Sealing Ring Type uPVC Pipes as per IS:
4985-2000 For use in Water Supply(All Dimensions in
mm)
Nominal Outside Diameter Nominal | Socket inner diameter | Minimum depth of engage-ment | Class I (0.25 MPA) Individual Value | Class II (0.4 MPA) Individual Value | Class III (0.6 MPA) Individual Value | Class IV (0.8 MPA) Individual Value | Class V (1.0 MPA) Individual Value | Class VI (1.25 MPA) Individual Value | Size | Dia Meter | Max. Min. | Max. | Min. | Max. | Min. | Max. | Min. | Max. | Min. | Max. | Min. | Max. | Min. | 90 | 90.7 | +0.8 - 0.0 | 70 | 1.7 | 1.3 | 2.6 | 2.1 | 3.7 | 3.1 | 4.6 | 4.0 | 5.7 | 5.0 | 7.1 | 6.1 | 110 | 110.8 | +0.9 - 0.0 | 75 | 2.0 | 1.6 | 3.0 | 2.5 | 4.3 | 3.7 | 5.6 | 4.9 | 7.1 | 6.1 | 8.7 | 7.5 | 125 | 128.9 | +1.0 - 0.0 | 78 | 2.2 | 1.8 | 3.4 | 2.9 | 5.0 | 4.3 | 6.4 | 5.6 | 8.0 | 6.9 | 9.8 | 8.5 | 140 | 140.9 | +1.0 - 0.0 | 81 | 2.4 | 2.0 | 3.8 | 3.2 | 5.5 | 4.8 | 7.3 | 6.3 | 8.9 | 7.7 | 11.0 | 9.5 | 160 | 161.0 | +1.1 - 0.0 | 86 | 2.8 | 2.3 | 4.3 | 3.7 | 6.2 | 5.4 | 8.3 | 7.2 | 10.2 | 8.8 | 12.6 | 10.9 | 180 | 181.1 | +1.1 - 0.0 | 90 | 3.1 | 2.6 | 4.9 | 4.2 | 7.1 | 6.1 | 9.2 | 8.0 | 11.4 | 9.9 | 14.1 | 12.2 | 200 | 201.2 | +1.1 - 0.0 | 94 | 3.4 | 2.9 | 5.3 | 4.6 | 7.9 | 6.8 | 10.3 | 8.9 | 12.7 | 11.0 | 15.7 | 13.6 | 225 | 226.4 | +1.1 - 0.0 | 100 | 3.9 | 3.3 | 6.0 | 5.2 | 8.8 | 7.6 | 11.5 | 10.0 | 14.3 | 12.4 | 17.6 | 15.3 | 250 | 251.5 | +1.1 - 0.0 | 105 | 4.2 | 3.6 | 6.5 | 5.7 | 9.8 | 8.5 | 12.9 | 11.2 | 15.9 | 13.8 | 19.6 | 17.0 |
Note: Elastomeric Rubber Ring Fit pipes are also available as per ISO and DIN standard.
|
